How to Get Water Out of Your Phone (2024 Guide)

Here is a step-by-step guide on how to get water out of your phone.

At some point in our lives, we have all mistakenly dropped our phones into the water. This may happen while you are chatting or snapping a picture.

Also, because of sloppiness, your phone can slide down into the water when you’re in the hot tub. If this happens, don’t worry; the best part is that one of these solutions might prevent your phone from suffering long-term damage.

Quick Steps to Take if Your Phone Falls into Water 

If you accidentally dropped your phone in the water, here is what to do immediately:

Take the phone to a dry location

Do not turn, shake, or move your phone too much after removing it from the water source. This will prevent further water infiltration into its internal components. Drain the device by placing it on a dry towel or pile of napkins in a well-ventilated area.

Unplug it

Remove your phone from the water as quickly as possible and turn it off. This will prevent electrical currents that could cause damage or pose a safety danger. Do not use your phone by connecting it to a power source.

Remove the phone case

Hand-dry your phone case after removing it from your pocket or purse. Once you have completely dried your phone and it’s safe to use again, return the case.   

Take off the phone’s battery and other accessories

 It’s best if you can remove the device’s battery and all other accessories. Also, remove components that are inside your phone (such as SD cards and the SIM card) even though some phone batteries are inbuilt. Place them next to your gadget to air dry for a few more minutes after gently patting them dry. 

Wait for it to dry

To ensure total water removal, allow your device to air dry and drain for at least 24 hours before trying any additional water removal techniques. Until you’ve extracted as much water as possible, avoid touching the phone, replacing its components, or turning the power on.

Guide to Getting Water Out of Your Phone

1. Switch Off Immediately

• Power Down: The first rule of thumb is to turn off your phone immediately. Electricity and water don’t mix well, and leaving your phone on could lead to a short circuit.
• No Charging: Resist the urge to charge your phone or plug it in. Wait until the interior is completely dry before reintroducing electricity.

2. Dry the Exterior

• Microfiber Cloth: Grab a microfiber cloth and gently wipe away any excess water from the surface of your phone. Pay special attention to the ports and speakers.
• Avoid Shaking: Refrain from shaking your phone to drain water from the speakers. This can actually push water further inside and cause more damage.

3. Remove What You Can

• Phone Case: If your phone has a case, carefully remove it. Dry the exterior thoroughly.
• SIM Card and Battery: Take out the SIM card and battery if possible. Dry them separately and leave them out to allow better ventilation.
• Patience: Don’t rush—wait at least 48 hours before reassembling your phone. Even if it seems fine now, water can continue to seep into internal components over time.

4. Let It Dry

• Flat Surface: Lay your phone flat on a towel or another microfiber cloth in a well-ventilated area. Avoid using the bathroom for drying.
• Air Circulation: Aim a fan at it, run a dehumidifier, or place it near a window. Air-drying is more effective than using rice, which can scratch your phone and introduce dust.
• Silica Gel Packets: If you have them, use silica gel packets to aid the drying process.

How to Get Water Out of Your Phone – Other Methods

Before taking your phone to a professional phone drying service, you may want to try the methods listed below to get rid of water from your phone. 

Silica Gel Method

The chemical makeup of silica, also known as silicon dioxide, is comparable to that of sand. Silica gel is a form of silica desiccant that absorbs around 40% of its weight in moisture and helps to lower overall humidity in enclosed spaces and packaging. If you have ever purchased a new item, such as shoes, medication, or gadgets, you are definitely familiar with the small silica gel packets that are packaged with it. These packets contain xerogel, a silica-based material that absorbs moisture and aids in the adhesion of water molecules to the gel’s surface. This makes it a useful tool for drying electronics, and some types of silica are reusable if heated to over 300°F.

Read: Remove phone number from Facebook | How to remove the mobile number from Facebook

Instant Oat Meal Method

Instant oatmeal is more absorbent than traditional rolled oats. Steel-cut oats are even more absorbent. If you already have instant oatmeal in your kitchen cabinet, it could be the most effective way to dry your phone. If you use oatmeal to dry your phone components, be warned that you may wind up with a phone covered in little, gooey particles of oatmeal dust. At your local grocery store, get a container of unflavored instant oatmeal.

Regular rolled oats can be a good (but less effective) substitute if you don’t have instant oatmeal. It’s possible that you’ll need to soak the phone in rolled oats for a day longer than you would for instant oatmeal. Steel cutting isn’t recommended because it takes a long time for it to absorb fluids.

Rice method

Using rice as a medium to get water out of the phone has been one of the best-known methods smartphone users will always run to. The idea is based on the fact that rice absorbs water, which is why it increases in size as it cooks and can be used to extract water from a wet device. Well, it is better to try something than nothing. Ensure your phone is turned off, and place your battery aside before you put the gadget into an uncooked bowl of rice. Leave it for at least 24 hours until it’s properly dried.  

Conclusion 

Dropping your phone into the water accidentally can be saddening. It might just happen in a blink. Well, we have all had the experience. If you have tried the methods listed above and your phone still doesn’t function properly, depending on how waterlogged the device is. Get a professional drying service to fix the device. 

Note that the methods described above are general guidelines. Specific phone models may have additional considerations. If needed, consult your phone manufacturer or a professional technician.

I hope this article was helpful. 

Related:

How to untag on Facebook Photo (Facebook post tag remover Guide 2024)

How to Sync Facebook Friends and Contacts on iPhone